The RV Mod Avalanche (EKKO Version) Starts… NOW


I’ve had a lot of time between learning about the Winnebago EKKO and actually receiving ours to think about mods I’d like to make.  During that time, the pile of “mod stuff” in my shop has grown to ridiculous proportions.  I walk you through some of the upcoming mods in this video:

 

If you’ve seen something in my giant pile you’re interested in, know that I’ll be tackling it in the upcoming months.  Naturally, I hope to do all these projects sooner rather than later, but Stef won’t let me just do RV mods 24×7.  She makes me sleep sometimes.

Also – Making a video about a mod takes considerably longer than just doing the mod.  So it’ll take me a while to work through it all.

Anyways – here are some links to the products you see in the video.  They’re affiliate links where possible, so know that any purchases you make are only serving to further my RV mod addiction.

I’d write more, but I want to get to work, so here’s the list. (But remember, this is only the stuff I show in the video.  There’s lots more.):

 

Perfect Tear Paper Towel Holder

The Bathroom Trash Receptacle

RV AC Silencer

SOG System (Type H)

True Induction Cooktop

Guzzle H2O Water Filter

Drinking Water Faucet

WeBoost Drive Reach RV

Amp-L-Start

Lithionics Batteries

Lippert Planet Table

WFCO 8930/50 RV Load Center

Victron Lynx Distributor

Victron MPPT Charge Controller

Victron MultiPlus II Inverter/Charger

Victron Programming Interface

PetSafe Cat door

Level Mate Pro +

Retractable Clothesline

Toothbrush Sanitizer

MEGA fuses

Heat Shrink Tubing

Cable Cutter

Cable Lug Crimper

 

 



James is a former rocket scientist, a USA Cycling coach, and lifelong fitness buff. When he's not driving the RV, or modifying the RV (or - that one time - doing both at once), you can find him racing bicycles, or building furniture, or making music. In his spare time, he works for a large IT company.


    46 thoughts on “The RV Mod Avalanche (EKKO Version) Starts… NOW

    1. Tom Boles

      James, sorry if I missed it, but is that a cool, white oval clock on the wall above the AC controls? I just finished watching the AC inlet silencer thingy video and caught it there…Thanks!

      Reply
        1. Tom Boles

          Thanks! Wistful thinking on my part..we’re looking for a clean-looking atomic clock-temp & humidity gage thing and that is what I thought I saw….

    2. joe dokes

      you need to seek help. to buy something and change it before you use it is not very smart, i like the cat door. have a great day

      Reply
    3. Shaun Simpkins

      There is a cornucopia of cool RV components in that Lippert catalog. But where did you buy that Planet Table? I thought Lippert is an OEM supplier.

      (Hankering after the frame-and-slat beds)

      Reply
      1. James - Post author

        It took a while working with them to get the table sent. Apparently, it’s not something they normally stock in the US. I’ve told them that they could expect a bunch of inquiries once I started making videos!

        Reply
    4. Stacy

      James, you are like a kid at Christmas with all that stuff! That Lippert table might be just what I’ve been looking for to replace the static one Dennis Zingler installed with his “Bistro” mod in my Travato K. Hmmm. Looking forward to seeing the evolution of your EKKO.

      Reply
      1. James - Post author

        Seems pretty cool so far, but I still haven’t figured out one of the locking modes. (It takes a cable to make it work.)

        Reply
    5. Rick Owen

      Winnebago should offer this as ‘The Fit RV Upgrade’ on the Ekko and give you a percentage of each one sold.

      Reply
      1. James - Post author

        I did get a similar product for Mel’s cabinet and one of the outdoor storage compartments.
        But mine are just something I picked up at the home center.

        Reply
    6. Corinne

      CNC Router? Are you perhaps getting a Shaper Origin? The hubster loves his. We would love to see what RV mods you could do then!

      Reply
      1. James - Post author

        That would have been an interesting way to go, but I went with a full quarter-sheet flat bed CNC from i2R.

        Reply
    7. Craig Horner

      Thanks for the great EKKO Modification’s “teaser” video!!!
      We’ll be getting our EKKO in a few weeks, so I’ll be eagerly waiting to see ALL of your videos, especially the solar/battery upgrades (as we deleted the generator too).
      Are you adding a “Low Voltage House Battery” auto engine start?

      Reply
      1. James - Post author

        Nah. We’ve got almost two thousand pounds to work with.
        I’ll weigh it when I’m all done, but I’m not concerned.

        Reply
    8. Graham Smith

      OK. You have officially consumed all the KoolAid you can handle and jumped into the deep end where all the alligators are waiting. It may take until next year to finally get everything back together again so you can actually travel. BTW, I didn’t see any warp drive nacelles in that so they must be coming later.

      Reply
      1. James - Post author

        You’ve got a point. I have been a little worried about the sheer number of mods standing between me and our first trip…

        And there are still mods planned that we didn’t show. Most of the ones that have to do with the chassis, I won’t do myself. But I’m not saying exactly when the warp drive is coming…

        Reply
        1. Graham Smith

          I’ve been there once too often so it’s not hard to see the writing on the wall. Particularly when you reach the bit where something doesn’t quite work and you realize you got a left-handed twist framistan when you needed a right-handed reverse twist one and they are backordered for 2 months.

        2. James - Post author

          Well, I have had 7 months to plan. Hopefully, I’ve thought of most things.

          (But I’m sure I haven’t, lol.)

    9. Bruce and Kim

      Hi James and Stef, we’ve been fans for many years, always very informative and fun.
      We’re considering the EKKO, and have plans of increasing battery capacity, to 12 or 16KW. Although I do have a question. In your dimensions video the generator was installed. In your first EKKO video tour at 3:35 you open the battery compartment but not the “other” one that was where the generator was.
      What are the dimensions of the compartment and the opening where the generator was, could you fit one or maybe two more of the Lithionics batteries in there?
      Is the wall between the two compartments a common wall?
      Thanks, will be watching for the 20k mod videos

      Reply
      1. James - Post author

        The wall between the two compartments is a double wall. Plus, the former generator compartment has a door that is too small to fit a battery inside (though you could stand up a battery if you could get it in the door).
        My solution will be more elegant.

        Reply
    10. John P. Sabo

      We have the same induction cooktop in our Coachman 2020 24A Galleria and it is really nice. I’d recommend not installing it permanently as Coachman did, but just store it when not in use. We routinely just take it outside and plug into the Galleria for power. Also, because of the ventilation fans for the cooktop, care needs to be taken in a permanent mounting location to ensure that no obstruction of the air vents will occur; it appears that a fire related to inadequate ventilation may have occurred in a Galleria a few years ago.

      Reply
      1. James - Post author

        We had the same one mounted up in Lance, so yep.
        I actually prefer having it mounted up, and not having dangling cords when cooking and something else to store when not.
        But yes, for anyone contemplating an induction cooktop mod, the venting is something to mind.

        Reply
    11. Andrew North

      Wow,…Steph, … after that router reveal, this may be a good time to have an affair….. looks like he’ll be REALLY busy… for awhile….

      ….joking,….just a joke…. ( sorta )

      Reply
    12. Alexa M Lewandowski

      James, your enthusiasm is contagious! So glad we are going to be eye-witnesses to the evolution of Number One.

      Reply
    13. Rich

      So how about the heater? I’d love to swap it for one that would burn gas from the Fords fuel tank. I have a hard time wrapping my mind around cold weather camping and having to worry about finding a place to fill the LP tanks. Replace the heater and if it also takes care of the hot water, you can remove the heavy limited LP tanks from the equation.

      Reply
      1. James - Post author

        Well, you don’t technically have to *fill* the propane tanks. You could just swap them at an automated kiosk.

        A single-fuel coach would be cool, we agree. But as far as changing anything with the propane system… we’re going to wait until we’ve lived with it for a while before making any decisions. I mean, if filling both propane tanks lasts all winter, is that really a problem? To us, it wouldn’t be.

        Reply
      1. James - Post author

        No tire swap planned.
        (There are no all terrain tires available in North America for the EKKO’s tire size anyway.)

        Reply
    14. Will

      James…what’s your van weigh wet and what’s the GVWR? How much room do you have to add weight and are you going to weigh the new stuff that goes into the van and weigh the stuff that comes out?

      I track my weight and make sure I’m within the GVWR, especially in the summer when the road is hot and my tires are up there in pressure.

      Reply
      1. James - Post author

        We have almost two thousand pounds of capacity available, and I know approximately what our running gear weighs. I’m not too concerned.
        I will weigh things when I’m done, but I’m not tracking the weight of my paper towel holder, or any other mod on an individual basis.
        Like you, we always travel within our RV’s GVWR and will continue to do so… That’s just smart RVing.

        Reply
    15. Craig Nelson

      Sounds like lots of fun ahead!

      I must say however that I think you’re not making the best choice with respect to your drinking water filter. I humbly suggest that you use conventional reverse osmosis with an added UV sterilizer and pressure pump to reprocess your gray water into fresh water.

      Then ALL the water in your fresh tank will be RO drinking water. Also ALL heavy metals and toxins will be removed and your TDS will be very low (which your chosen guzzle H2O filter cannot do). Also, you’ll never run out of fresh water or gray tank space. Yes I know you have 55 gal of fresh, but why not make it all RO water and have it be full all the time.

      Then you won’t need to install another faucet in your always precious counter area. Just turn on the normal tap and get pure drinking water. If you’re really in the boonies you can refill by just pouring lake or river water into your sink (which then drains to the gray tank).

      I did this mod to my Travato and it’s a whole new ball game. We use the sink to wash dishes now, take longer showers and don’t need to dump so often. I should probably post a video of my own showing the process, but I think you get it and I’ll happily send some photos if you need clarity.

      Best wishes!

      Reply
      1. James - Post author

        The water capacity in the EKKO is sufficient that I never really considered recycling water systems. We’re never “out of civilization” for long enough to make that a consideration. (Remember, we’re road cyclists… we need roads.)
        And while I did consider RO systems for the RV, I didn’t want to deal with the brine, or the pressure pumps. Again… didn’t seem required for our use case.

        Reply
    16. Matt

      Wohoo! Finally going Victron. Do the Lithionics batteries that come in the EKKO support CAN? Second alternator with a Wakespeed WS500 CAN controlled regulator would be the icing on the cake if they did.

      Reply
        1. Mat k

          Hadn’t even considered a 50 amp conversation on a van. Makes sense though if you are putting in that big a battery. Would take ages to charge with just 30 and trying to also run the ac and other loads. Looking forward to seeing it all come together.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Comment moderation is in use. Please do not submit your comment twice -- it will appear once we have had the chance to review it.